Guide
Commercial drone cleaning in New Zealand.
Drone building washing is becoming a common option on commercial cleaning work in New Zealand. For operators weighing it up, the questions are rarely about whether the aircraft can spray water. They are about which rule set applies, what documentation a client will ask for, and which platform actually suits the work on the schedule.
This guide sets out how the New Zealand regulatory picture works in practice, what a mature procedure set covers, and how to choose between the aircraft sizes in the DCI range without buying more machine than the work justifies.
At a glance
- —Part 101 covers aircraft under 25 kg flown within its conditions, including consent to fly over people and property.
- —Part 102 requires an operator certificate for work outside those conditions.
- —Aircraft weight and the site itself both decide which one you operate under.
- —Documented procedures carry more weight with clients than tank size.
Part 101 and Part 102: what actually changes
New Zealand commercial drone work sits under two sets of Civil Aviation Rules. Part 101 applies to aircraft under 25 kg flown within its conditions, including: keeping the aircraft in visual line of sight, staying below 120 m, getting consent before flying over people and property, keeping 4 km from aerodromes unless the CAA conditions are met, and getting an air traffic control clearance in controlled airspace. Night flying is only allowed under specific CAA conditions.
Drones between 15 kg and 25 kg carry extra Part 101 requirements: the aircraft needs an airworthiness inspection and approval from a person or organisation authorised by the CAA Director, and the pilot must pass a competency assessment with a CAA-authorised person or organisation.
Any operation that can't meet the Part 101 rules needs a Part 102 unmanned aircraft operator certificate, held by the operator, with an exposition the CAA has accepted. Aircraft of 25 kg and over are always Part 102.
In practice, the job decides the rule set as much as the aircraft does. A compact wash drone can be flown under Part 101 on sites where you can meet the conditions, such as getting consent from everyone you fly over. Many urban façade jobs, where the public, roads or neighbouring property are below the aircraft, can't meet them and need Part 102. Heavier aircraft such as the 166 (40 kg) and the Clean Elite Pro (99 kg) are flown under Part 102. Always check the current CAA rules for each job.
Why the SOP matters more than the aircraft
Two operators can fly identical machines and run completely different businesses. The difference is the documented system around the aircraft: pre-flight checks, battery and chemical handling, site assessment, exclusion zones around the public, flight logging, maintenance intervals, and the paperwork that proves all of it happened.
Under Part 101 you are still responsible for a safe operation even though no one has signed off your procedures. Under Part 102 your exposition is the thing CAA assesses, so an operator turning up with a mature, written procedure set starts from a very different position than one writing it from scratch.
This is the reason a packaged system is worth more than a box of hardware. Standard operating procedures that have already been flown, reviewed and revised in the field save months of trial and error, and they give you something concrete to hand a client's health and safety team when they ask how you'll keep their building, staff and public safe.
Matching aircraft size to the job
Lift capacity is the headline number but it isn't the only one that matters. A larger tank means fewer landings and refills per elevation, which matters on tall facades where the aircraft is working hard to hold position. A smaller aircraft is quicker to deploy, easier to transport, cheaper to insure, and simpler to approve for tighter sites.
Operators focused on low-rise commercial buildings, signage and tighter sites often find the smaller platform is the better fit to start. Operators quoting multi-level facades, large industrial roofs or high-rise glass tend to move up quickly once they see how much time is lost to refilling.
A sensible path is to start with the aircraft that matches the work you can actually win in your first twelve months, then add capacity once the schedule justifies it. Buying the biggest available platform on day one is a common and expensive mistake.
Training is not certification
Worth being precise here, because the market is full of loose language. Completing a training course does not give you a qualification recognised under the Civil Aviation Rules, and it does not replace an operator certificate under Part 102. What training does is build the pilot skill and the operational judgement that keep a commercial job safe, repeatable and insurable.
Treat training as the foundation and compliance as a separate workstream you handle with CAA. Anyone telling you a course alone authorises commercial operations is either confused or selling something.
What to budget beyond the aircraft
The purchase price is the easy number. Plan for insurance covering commercial drone operations and public liability, batteries and wear parts, chemical supply and handling equipment, transport and safe charging, and the administrative time behind every quote and site assessment.
If your pathway involves Part 102, budget for the time and cost of preparing an exposition and going through the certification process. It is not a form you fill in once; it is a living document that gets audited.
A realistic first twelve months
Most operators who make drone cleaning work commercially start narrow. One aircraft, one or two service types, a defined region, and a small number of repeat commercial clients who value documented safety over the lowest quote.
From there the pattern is predictable: prove the method on lower-risk sites, build a flight history, use that record to win larger buildings, and only then add capacity or move into Part 102 work. Operators who try to launch across every service and every building type at once usually end up with a lot of equipment and very little repeat business.
Choosing between the 10, 16 and 40 litre platforms
The VIP Wash Drone 104 (10 L) is the entry point and the only aircraft in the range that can be flown under Part 101, on jobs that meet the Part 101 conditions and once the pilot has passed a CAA-authorised competency assessment. The 166 (16 L, 40 kg) is the middle of the range, adding capacity for taller and larger facades, and is flown under Part 102. The Clean Elite Pro 40 LTR is the production platform for operators running volume across multi-level buildings, also under Part 102.
Every unit is airworthiness-inspected before handover, and each can be supplied with the Drone Group SOP set, training and operator advice so the aircraft arrives with a working method rather than a manual. Compare the full fleet and specifications.
Get the pricing and info pack.
Tell us your region, the type of work you're targeting and your current licensing position, and you'll get the full package detail and pricing.
Request the Pricing & Info Pack